ALUX 2V OPzS tubular gel battery series
Lead Acid Battery Solution

ALUX OPzS 600Ah 2V Tubular Gel Battery (OPzS600)

ALUX OPzS 600Ah 2V Tubular Gel Battery (OPzS600) is a 2 V 600 Ah tubular gel battery in a 145 × 206 × 647 mm case weighing 32 kg, rated for deep-cycle duty in telecom, UPS and substation standby. Dimensions, terminal type and weight are listed in the specification table.



Product Overview

The ALUX OPzS600 is a 2 V 600 Ah OPzS tubular gel cell, 145 × 206 × 647 mm over the case (688 mm including terminals) and weighs 32 kg. The OPzS range uses thick tubular positive plates for large-capacity, long-duration discharge — utility and substation duty rather than short high-rate bursts. Cells are series-connected into the bank voltage, with 2 M10 × 20 terminals per cell.

Key Features

  • Thick tubular positive plates — a heavy tubular plate design built for large-capacity, long-duration discharge rather than short high-rate bursts.
  • Gel electrolyte — immobilised acid keeps tall cells homogeneous and the battery maintenance-free.
  • High-temperature tolerance — rated for cabinets and shelters at 35–70 °C.
  • Glass-fibre separator — high-absorption separator holds electrolyte against the plates and extends cycle life.
  • High-strength ABS container — moulded case and lid for stationary banks.
  • Bolt terminals — threaded posts, terminal count as listed, for copper connector bars.

Technical Specifications

Specification
OPzS600
Model
OPzS600
Nominal voltage
2 V
Nominal capacity
600 Ah
Chemistry
Tubular gel valve-regulated lead-acid (VRLA)
Length
145 mm
Width
206 mm
Height
647 mm
Total height (incl. terminals)
688 mm
Terminal type
M10 × 20
Terminal count
2
Weight
32 kg
Container
High-strength ABS

Typical Applications

  • Utility-scale solar and storage plants
  • Substation and switchgear control power
  • Telecom core sites
  • Long-duration UPS and EPS
  • Emergency lighting and fire systems
  • Oil, gas and pipeline off-grid power
  • Marine and harbour standby
  • Railway signalling